Ethernet
| Gate | 1x RJ45 (PoE PD is supported) |
| Physical layer | 10/100/1000 Base-T (IEEE 802.3) |
| Data Rate | 10/100/1000 Mbps (automatically detected) |
| Interface | Auto MDI / MDIX |
| Fashion | Full or Half Duplex (automatically detected) |
| IP address | DHCP |
| DNS | 8.8.8.8 / 8.8.4.4 |
| MTU | 1500 |
| NAT | Enabled |
Double connection (failover)
4G connection is selected when an ICMP-ECHO request fails 3 times to 8.8.8.8 and 8.8.4.4.
Is it not possible in the network to send an ICMP ECHO to these IP addresses? Then the 4G connection will be used.
Wi-Fi
It is not possible to connect the base station to your Wi-Fi network. We are working on integrating this capability.
Firewall
Is your connection not working? Your firewall settings may need to be adjusted.
For the most current Firewall settings, go to bhv-knop.nl/firewall.
Surroundings
| Ambient temperature | -40 ° C to + 60 ° C |
| Humidity | 0% to 95% (non-condensing) at 25°C |
| Ethernet isolation | 1.5kV RMS |
